Description

The DJI O3 Air Unit is finally here! Integrating DJI’s cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it’s possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance – it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!

Note: The new DJI O3 Air Unit can draw close to 2A under certain settings. Please verify that your flight controller is capable of 9V / 2A. If not, please consider powering the Air Unit directly from battery +/- on the flight controller or by using a standalone voltage regulator that supplies the required 2A.

Features

Works with DJI FPV Goggles V2, DJI Goggles 2, and DJI FPV Remote Controller 2
D-Cinelike mode for Vivid Colors
Flagship O3+ Video Streaming
Customizable Canvas Mode
155° Super-Wide FOV
1/1.7-Inch Sensor
Compact in Size

Specifications

DJI O3 AIR UNIT

Live View Quality and End-to-End Latency:
- With DJI FPV Goggles V2:
  - 810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
  - 810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
- With DJI Goggles 2:
  - 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
  - 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.”
Supported Flight Controller Firmware: Compatible with flight controller firmware that supports Betaflight. For more information, check the product FAQ.
Channels:
- Supports auto mode
- Supports manual mode: 40 MHz: 1 channel; 20 MHz: 3 channels; 10 MHz: 3 channels
Max Video Transmission Range: 10 km (FCC), 2 km (CE), 6 km (SRRC)
Supported DJI Goggles: DJI Goggles 2 and DJI FPV Goggles V2
Supported DJI Remote Controller: DJI FPV Remote Controller 2
Recommended microSD Cards:
- SanDisk Extreme U3 V30 A1 32GB microSDXC
- SanDisk Extreme Pro U3 V30 A1 32GB microSDXC
- Kingston Canvas Go!Plus U3 V30 A2 64GB microSDXC
- Kingston Canvas React Plus U3 V90 A1 64GB microSDXC
- Kingston Canvas React Plus U3 V90 A1 128GB microSDXC
- Kingston Canvas React Plus U3 V90 A1 256GB microSDXC
- Samsung PRO Plus U3 V30 A2 256GB microSDXC”
Weight:
- Air Unit (camera module excluded): Approx. 28 g
- Air Unit (camera module included): Approx. 36.4 g
- Antenna: Approx. 3 g
Operating Temperature: -10º to 40º C (14° to 104° F)
Dimensions:
- Transmission Module: 32.5×30.5×14.5 mm
- Camera Module: 21.2×20×19.5 mm
- Coaxial Cable: 115 mm
- 3-in-1 Cable: 100 mm
- Antenna: 85 mm
Supported SD Cards: microSD (up to 256 GB)
Communication Frequency:
- 2.400-2.4835 GHz (RX only)
- 5.725-5.850 GHz (RX and TX)
Channels Info:
- FCC/SRRC/CE:
- 40 MHz:
- Channel 1: 5794.5 MHz
- 20 MHz/10 MHz:
- Channel 1: 5768.5 MHz
- Channel 2: 5804.5 MHz
- Channel 3: 5839.5 MHz
Transmission Power (EIRP):
- FCC: < 33 dBm
- CE: < 14 dBm
- SRRC: < 30 dBm
Input Voltage: 7.4-26.4 V
Cable: 3-in-1 100mm

DJI O3 CAMERA

Weight: Approx. 8.3 g (coaxial cable included)
Lens:
- FOV: 155°
- Equivalent Focal Length: 12.7 mm
- Focal Length: 2.34 mm
- Aperture: f/2.8
- Focus Mode: FF
- Focus Range: 0.6 m to ∞
Video Resolution:
- With DJI Goggles 2:
  - 4K@50/60fps
  - 2.7K@50/60/100fps
  - 1080p@50/60/100fps
- With DJI FPV Goggles V2:
  - 4K@50/60fps
  - 2.7K@50/60/100/120fps
  - 1080p@50/60/100/120fps
Sensor: 1/1.7-inch CMOS
ISO Range:
- 100-6400 (Auto)
- 100-25600 (Manual)
EIS: Supports RockSteady
Shutter: Rolling Shutter
Effective Pixels: 48 MP
Video Format: MP4
FOV: 155°