Description
Exceptional flight performance. Unparalleled versatility. Improved durability. Simple to build. Easy to maintain.
This is data-driven FPV.
The 2.5mm thick main plate supports up to three full-sized 30.5mm stacks. 20 and 25.5mm stacks are supported and the M2 20mm holes are designed to be easily drilled out to M3 if required.
The top plate has pressnuts installed for effortless GoPro mounting using a standard 32x32mm footprint.The cut outs in the top and bottom plate of the AOS 5.5 V2 are optimized to preserve as much of the bending and torsional stiffness of the plate as possible whilst minimizing weight.
Arms
The AOS 5.5 V2 uses a topology optimized truss design for the arms. This truss design provides enormous torsional stiffness, resolving a key source of vibration in traditional frames. It also allows two particularly harmful resonant modes to be individually modified to separate them in frequency.
Truss structures are inherently very strong as they convert bending loads into compression and tension in the individual members. Carbon is much stronger in pure tension and compression than in bending. The 3 screw motor mounting reduces weight and removes the motor hole that can be a stress riser for compressive failure in hard crashes.
Y-shaped motor protectors minimize the risk of damage to those expensive components. Should you ever need to replace an arm, there are only two screws to undo and neither are shared with your electronics.
AOS O3 5.5″ FRAME KIT
32x32mm GoPro mounting holes in the top plate with installed press nuts
Fits the DJI 03 Air Unit (use front stack mounting) and HDZero 1W VTX
Up to three 30.5×30.5 mm 25.5×25.5 mm or 20×20 mm stacks
Designed for up to 5.5-inch props (no props in view)
Recommended motor size 2207, 2208, 25mm
Fits the DJI FPV camera or 19×19 mm camera
16×16 mm up to 19×19 mm motor mounting
2mm Top Plate and Sandwich Plates
XT60 pass through in top plate
Two captive battery strap slots
Approx 123g with hardware
2.5mm Bottom Plate
235mm Wheelbase
6 mm Arms
Packing List
1 x AOS 5.5 O3 Frame Kit
1 x TPU Parts
4 x Motor Wire Shield Tube
1 x Screw Bag
2 x Battery Strap
Reviews
There are no reviews yet.