Team Corally Ultra-X 80 AC/DC Balance Charger 80W 1-6S

Cinerigs introduces Team Corally products in India!

True Multi-Chemistry Versatility

The Ultra-X 80 supports a comprehensive selection of battery technologies used throughout the RC world.

It is compatible with:

• LiPo batteries
• LiHV batteries
• LiIon batteries
• LiFe batteries
• NiMH batteries
• NiCd batteries
• Pb lead-acid batteries

Lithium compatibility extends from 1S to 6S, while NiMH and NiCd packs with up to 15 cells are supported. Dedicated Pb programs are available for lead-acid batteries from 2 to 20V.

This wide compatibility makes the Ultra-X 80 suitable for RC cars, aircraft, boats, transmitters, receivers and a broad range of workshop applications.

Precision Lithium Battery Management

Dedicated programs are available for charging, balance charging, fast charging, storage preparation and discharging lithium batteries.

In Balance mode, the internal processor monitors the voltage of every connected cell and regulates the charging current to achieve a more consistent voltage level throughout the complete battery pack. An integrated balancer is built into the charger, eliminating the need for a separate external balancing device.

The Ultra-X 80 also monitors individual lithium cell voltages during discharge. If an abnormal cell-voltage condition is detected, the process is stopped to help protect the battery.

Fast and Storage Charging Programs

The Fast Charge program is designed to reduce the time required to prepare a lithium battery for use. It prioritises faster completion of the charging process when the highest possible degree of cell balancing is not required.

For batteries that will not be used immediately, Storage mode brings the pack to a more appropriate voltage for long-term storage. Depending on the existing battery voltage, the charger charges or discharges the pack until the required storage level is reached.

These dedicated programs allow the Ultra-X 80 to adapt to the way each battery will be used, whether it is required for the next run or being prepared for storage.

NiMH and NiCd Battery Care

The Ultra-X 80 offers both automatic and manually adjustable charging modes for NiMH and NiCd batteries.

In automatic mode, the charger controls the supplied current while respecting the selected maximum-current limit. Manual mode provides direct control over the charging current. Adjustable Delta Peak sensitivity allows the charge-termination behaviour to be matched more closely to the connected battery.

Charge, discharge and cycle programs are available. Between one and five continuous charge and discharge cycles can be performed to refresh, condition or evaluate compatible NiMH and NiCd battery packs. The charged and discharged capacity of each completed cycle can be reviewed directly on the display.

Dedicated Pb Battery Programs

The Ultra-X 80 includes dedicated charging and discharging programs for 2–20V Pb lead-acid batteries.

The charging current and nominal battery voltage can be configured to suit the connected battery. This makes the charger suitable for compatible lead-acid packs used in field equipment, starting systems and other RC-related applications.

Always follow the battery manufacturer’s recommended charging current, as lead-acid batteries require different charging conditions from lithium, NiMH and NiCd battery technologies.

Integrated Battery Analysis

A dedicated internal-resistance measurement function provides additional insight into the condition and performance of lithium batteries.

The Ultra-X 80 can display the relative internal resistance of each individual cell as well as the total resistance of the complete battery pack. These measurements are useful when comparing batteries, identifying differences between cells and monitoring changes in pack performance over time.

For meaningful comparisons, batteries should be tested under similar voltage and temperature conditions.

Five Programmable Battery Memories

Frequently used battery configurations can be saved directly in the charger.

The Ultra-X 80 stores up to five battery profiles containing the relevant charging and discharging parameters. Saved profiles can be recalled whenever the same battery is used again, reducing setup time and helping minimise repetitive input errors.

This is especially convenient for RC users who regularly operate several different battery types or configurations.

Advanced Safety Management

The Ultra-X 80 combines programmable safety parameters with continuous electronic monitoring throughout the charging and discharging process.

Available safety functions include:

• Adjustable maximum-capacity limit
• Programmable safety timer
• Adjustable temperature cut-off
• Delta Peak sensitivity for NiMH and NiCd batteries
• Automatic charging-current limit in NiMH and NiCd Auto mode
• Input-voltage monitoring during DC operation
• Lithium cell-count detection and verification
• Individual lithium cell-voltage monitoring
• Automatic process termination when an error is detected
• Temperature-controlled cooling fan

An optional external temperature sensor can be connected to the dedicated three-pin port. When the battery reaches the selected temperature limit, the charger automatically terminates the process.

Clear and Controlled Operation

The illuminated LCD provides direct access to the selected battery type, operating program, charging or discharging current, battery voltage, processed capacity and elapsed time.

Four dedicated control buttons make it easy to navigate through the programs and adjust the required values. The buttons are illuminated and provide an immediate visual indication of the charger’s operating status:

• Blue illumination indicates that the charger is in standby mode
• Red illumination indicates that a charging process is active
• Green illumination confirms that the charging process has been completed

This colour-coded status system makes it possible to check the charger’s progress at a glance, even from a distance. During operation, the display continues to provide detailed real-time charging or discharging information.

An automatic cooling fan activates when the internal temperature rises, supporting stable performance during demanding charging sessions.

Features:

• High-performance 80W AC/DC multifunction balance charger
• Integrated 100–240V AC power supply
• 11–18V DC input for mobile operation
• Maximum charging power of 80W
• Adjustable charging current from 0.1 to 8.0A
• Adjustable discharge current from 0.1 to 2.0A
• Maximum discharge power of 5W
• Compatible with LiPo, LiHV, LiIon and LiFe batteries
• Supports 1S to 6S lithium batteries
• Supports 1 to 15-cell NiMH and NiCd batteries
• Supports 2–20V Pb lead-acid batteries
• Charge, Balance, Fast Charge, Storage and Discharge lithium programs
• Integrated lithium battery balancer
• Balance current up to 500mA per cell
• Individual lithium cell-voltage monitoring
• Individual cell balancing during charging
• Cell monitoring and balancing during discharge
• Automatic lithium cell-count detection
• Automatic and manual NiMH/NiCd charging modes
• Adjustable Delta Peak sensitivity
• NiMH and NiCd charge, discharge and cycle programs
• One to five programmable charge and discharge cycles
• Dedicated Pb charge and discharge programs
• Internal-resistance measurement
• Individual cell and total pack resistance display
• Five programmable battery memories
• Adjustable maximum-capacity protection
• Programmable safety timer
• Adjustable input-voltage cut-off
• Temperature cut-off with optional temperature sensor
• Adjustable cooling period between battery cycles
• Configurable button sound and completion buzzer
• Illuminated operating buttons with colour-coded status indication
• Blue button illumination in standby mode
• Red button illumination during charging
• Green button illumination when charging is complete
• Automatic cooling fan
• Clear illuminated LCD interface
• XT60 charging output
• 2S to 6S XH balance connector
• Dedicated three-pin temperature-sensor port

Technical Specifications:

• AC input voltage: 100–240V
• DC input voltage: 11–18V
• Maximum charging power: 80W
• Maximum discharge power: 5W
• Charging current: 0.1–8.0A
• Discharge current: 0.1–2.0A
• Compatible battery chemistries: LiPo, LiHV, LiIon, LiFe, NiMH, NiCd and Pb
• Lithium battery compatibility: 1S–6S
• NiMH/NiCd compatibility: 1–15 cells
• Pb battery compatibility: 2–20V
• Balance current: 500mA per cell
• Charging output connector: XT60
• Balance connector: XH 2S–6S
• Temperature-sensor connection: 3-pin

Packaging Content:

• Team Corally Ultra-X 80 AC/DC Balance Charger
• AC input cable
• Instruction manual

An external temperature sensor and DC input cable may be required for certain applications and are available separately.